# BSI Grundschutz++ (GS++)

Framework id: `bsi_grundschutz_pp`. Security Framework. Publisher: Bundesamt für Sicherheit in der Informationstechnik (BSI). Version: Anwenderkatalog of 29 October 2026 (BSI-Standard 300-1 v1.0). Region: Germany. Mapping licence: CC BY-SA 4.0.
Source text: https://www.bsi.bund.de/EN/Themen/Unternehmen-und-Organisationen/Standards-und-Zertifizierung/Grundschutz-in-der-Informationssicherheit/GrundschutzPlusPlus/grundschutz-plus-plus_node.html

Each line is a clause, the NIST SP 800-53 controls OSA maps to it, and OSA's estimate of how far those controls cover it.
Clause titles and coverage figures are OSA's own summaries and estimates, so quote the source, not this card.
German titles (`title_de` in the JSON) are the source's own wording, from BSI's Anwenderkatalog Grundschutz++ of 29 October 2026, by the Bundesamt für Sicherheit in der Informationstechnik (https://github.com/BSI-Bund/Stand-der-Technik-Bibliothek/blob/c3f37859fdf302394de39e89252eb3e72a45953c/control_layer/Grundschutz%2B%2B/Grundschutz%2B%2B-resolved_catalog.json), licensed under CC BY-SA 4.0 (https://creativecommons.org/licenses/by-sa/4.0/). OSA translated BSI's titles into English and summarised the requirements in the rationale and gaps. Where BSI gives two requirements the same title, the English title adds the subject. OSA made this mapping independently of BSI and shares it under the same licence.
How this mapping was made: OSA's own analysis, from BSI's catalogue by three independent ratings. NIST's catalogue of registered crosswalks has none for GS++ (checked 1 November 2026). BSI's repository holds mappings to GS++ from ISO/IEC 27001:2022 Annex A and from IT-Grundschutz 2023, and none to SP 800-53. Each of the 652 base requirements was rated three times, independently, by AI models working from BSI's German text, with BSI's guidance where the wording left the scope open, and from the control statements. Each rater read a requirement together with its enhancements and rated them as one. No rater saw another's rating. The requirements were rated in five groups of practices, by three raters to a group. A control is listed for a requirement where at least two of the three ratings named it, or where OSA's house rule for policy clauses adds it. The coverage figure is the median of the three estimates of how much of the requirement and its enhancements an organisation would meet by putting the listed controls in place. The rationale and gaps were written after the controls were settled, from the raters' reasons and from the gaps at least two of them named. Texts: Anwenderkatalog Grundschutz++ (resolved catalogue, OSCAL) (Bundesamt für Sicherheit in der Informationstechnik, catalogue version of 29 October 2026, in the Stand-der-Technik-Bibliothek repository at commit c3f3785, licensed under CC BY-SA 4.0).

## Clauses (652, average coverage 73%)
- GC.1.1 Establishing and maintaining an ISMS: PM-01, PM-31 (55%)
- GC.1.2 Approval of the ISMS: PM-01 (70%)
- GC.2.1 Defining the organisation's external context: PM-16, PM-28 (40%)
- GC.2.2 Defining the organisation's internal context: PM-07, PM-11, PM-28 (50%)
- GC.3.1 Compliance management: procedures and rules: AT-03, PM-01, PM-28, PT-02 (40%)
- GC.4.1 Analysis of external interested parties: PM-28 (25%)
- GC.4.2 Analysis of internal interested parties: PM-11, PM-28 (30%)
- GC.5.1 Setting information security objectives: AC-01, AT-01, AU-01, CA-01, CM-01, CP-01, IA-01, IR-01, MA-01, MP-01, PE-01, PL-01, PM-01, PM-06, PM-09, PS-01, RA-01, SA-01, SC-01, SI-01, SR-01 (65%)
- GC.6.1 Defining the scope of the ISMS: PL-02 (50%)
- GC.7.1 Procedure for information security classification: PM-11, RA-02 (85%)
- GC.7.2 Business processes with high protection needs: RA-03 (80%)
- GC.8.1 Procedure for ISMS resource planning: PM-03, SA-02 (75%)
- GC.9.1 Setting up a security organisation: AC-05, PM-01, PM-02, PM-13, PM-29 (65%)
- GC.10.1 Defining a procedure for communication management: PM-01, PM-15, SA-03 (45%)
- GC.11.1 Document control: PM-01, SI-12 (35%)
- GC.12.1 Governance: risk management method: PM-09, PM-28, RA-01 (80%)
- STM.1.1 Defining and bounding the information domain: PL-02, PM-05 (65%)
- STM.1.2 Documenting external interfaces: CA-03, PL-02, SA-09 (70%)
- STM.2.1 Creating a requirement package: CM-08, PL-02, PL-10, PL-11 (60%)
- STM.3.1 Reviewing the assigned security level: PL-10, PL-11 (55%)
- STM.4.1 Carrying out the risk analysis: RA-03 (70%)
- STM.5.1 Setting requirement parameters: PL-02, PL-11 (85%)
- UMS.1.1 Determining the implementation status: CA-02, CA-07, PL-02 (85%)
- UMS.1.2 Assessing the residual risk: CA-06, RA-03, RA-07 (70%)
- UMS.2.1 Implementation planning: CA-05, PM-04 (80%)
- UMS.2.2 Implementation planning: prioritising measures: PM-04, RA-07 (60%)
- UMS.3.1 Naming those responsible for implementation: CA-05 (40%)
- UMS.4.1 Setting implementation deadlines: CA-05, PM-04 (80%)
- UMS.5.1 Authorising exceptions: CA-06, RA-07 (45%)
- UMS.5.2 Documenting exceptions: PL-02 (55%)
- UMS.6.1 Tracking implementation progress: CA-05, PM-04 (80%)
- UMS.6.2 Updating the implementation plan: CA-05, PM-04 (85%)
- UMS.7.1 Maintaining compliance during implementation: CA-02, CA-07 (50%)
- VRB.1.1 Procedure for continuous improvement: PM-01, PM-04, PM-31 (50%)
- VRB.2.1 Handling nonconformities: CA-05, CA-07, IR-04 (40%)
- VRB.2.2 Adapting the ISMS after nonconformities: PM-01 (50%)
- VRB.3.1 Identifying opportunities for improvement: PM-31 (30%)
- VRB.4.1 Corrective measures: CA-05, RA-07 (60%)
- VRB.4.2 Improvement measures: PM-04, PM-31 (30%)
- VRB.5.1 Improvement plan: prioritising measures: CA-05, PM-04 (65%)
- VRB.6.1 Reviewing the improvement achieved: CA-02, CA-07 (70%)
- VRB.6.2 Evaluating the improvement achieved: CA-07, PM-06, PM-31 (55%)
- VRB.7.1 Handling compliance violations: IR-04, IR-06, IR-08, PS-08 (55%)
- PERF.1.1 ISMS performance evaluation: procedures and rules: CA-01, PM-06, PM-31 (80%)
- PERF.1.2 Evaluating the implementation plan: CA-05, PM-04 (80%)
- PERF.1.3 Keeping the requirements up to date: PL-02, RA-03 (70%)
- PERF.2.1 Reviewing compliance with obligations: CA-02, CA-07 (50%)
- PERF.3.1 Building and maintaining an audit programme: CA-01, CA-02, PM-14 (80%)
- PERF.3.2 Documenting audit results: CA-02 (65%)
- PERF.4.1 Suitability review of the ISMS: PM-04, PM-06, PM-26, PM-31 (50%)
- PERF.4.2 Report to top management: PM-06, PM-31 (70%)
- PERF.5.1 Monitoring methods and tools: CA-07, PM-31, RA-05, SI-04 (80%)
- RISK.1.1 Risk management: methods to a recognised standard: PM-09, PM-28, RA-01 (75%)
- RISK.1.3 Risk owner: CA-06, PM-10, PM-29 (65%)
- RISK.1.5 Approval of risk management: PM-01, PM-09, PM-28, PM-29 (50%)
- RISK.1.10 Approval of implementation planning: CA-05, CA-06 (55%)
- ASST.1.1 Information and assets: procedures and rules: CM-01, MA-01, MP-01, SI-12 (70%)
- ASST.1.2 Information and assets: regular review: CM-01, MA-01, MP-01 (85%)
- ASST.2.1 Inventory of information: CM-08, CM-12, PM-05 (60%)
- ASST.2.2 Inventory of systems: CM-08, PM-05, SI-04 (90%)
- ASST.2.3 Inventory of applications: CM-07, CM-08, CM-10, CM-11, SR-04 (80%)
- ASST.2.4 Data classification: RA-02 (80%)
- ASST.3.1 Usage agreements for information and assets: AC-21, PL-04, PS-06 (85%)
- ASST.3.2 Removal of unneeded residual data and metadata: AC-04, SI-12 (40%)
- ASST.3.3 Labelling of information: AC-16, MP-03, PE-22 (85%)
- ASST.3.4 Labels on IT systems free of confidential data: SC-38 (30%)
- ASST.3.5 Tainting of data: SI-20 (90%)
- ASST.3.6 Verification of information against other sources: AU-06, SI-22 (40%)
- ASST.3.7 Pseudonymisation before sharing: SI-19 (65%)
- ASST.3.8 Anonymisation before sharing: SI-19 (70%)
- ASST.3.9 Keeping data up to date: SI-18, SI-21 (45%)
- ASST.3.10 Authorisation of data locations: CM-12, PE-17, SA-09 (70%)
- ASST.3.11 Authorisation of systems that process data: AC-19, AC-20, CA-06, CM-07, MP-07 (75%)
- ASST.3.12 Authorisation of people or organisations to access data: AC-02, AC-03, AC-06 (85%)
- ASST.3.13 Storage of physical assets: MP-04 (45%)
- ASST.3.14 Reserve of physical assets: MA-06 (55%)
- ASST.3.15 Loan pool of physical assets: CM-02 (45%)
- ASST.4.1 Authorisation of interfaces for information exchange: CA-03, CA-09 (70%)
- ASST.4.2 Confidentiality and integrity in transport: MP-05, SC-08 (85%)
- ASST.4.3 Authorisation of publications: AC-22 (75%)
- ASST.4.4 Proof of receipt: AU-10 (80%)
- ASST.4.5 Agreements on information exchange: CA-03 (70%)
- ASST.5.1 Documenting maintenance needs: MA-02, MA-06 (60%)
- ASST.5.2 Managed maintenance: MA-02, MA-06 (85%)
- ASST.5.3 Authorisation of maintenance: MA-02, MA-04 (90%)
- ASST.5.4 Handling maintenance as changes and tests: CM-03, CM-04 (85%)
- ASST.5.5 Maintenance windows: MA-02 (15%)
- ASST.5.6 Maintenance by external parties: MA-05 (95%)
- ASST.5.7 Documentation of maintenance: MA-02, MA-04 (90%)
- ASST.6.1 Loss of assets: IR-04, IR-06, MP-06 (50%)
- ASST.6.2 Return of lost assets: SI-07, SR-10 (55%)
- ASST.6.3 Conformity check on return of assets: CM-02, SR-10 (65%)
- ASST.6.4 Reset to initial state on return: CM-02, MP-06 (80%)
- ASST.7.1 Uninstalling unneeded applications: CM-07 (80%)
- ASST.7.2 Retention and deletion periods: AU-11, SI-12 (85%)
- ASST.7.3 Managed deletion or destruction: MP-06, SI-12, SR-12 (85%)
- ASST.7.4 Recovery test to confirm deletion: MP-06 (85%)
- ASST.7.5 Destruction equipment for paper documents: MP-04, MP-06 (60%)
- ASST.7.6 Authorisation of asset disposals: MP-06, PE-16, SR-12 (75%)
- ASST.7.7 Removing labels before disposal: MP-06, SR-12 (40%)
- PERS.1.1 Personnel: procedures and rules: AT-01, PS-01 (80%)
- PERS.1.2 Personnel: regular review: AT-01, PS-01 (90%)
- PERS.2.1 Tasks with boundaries and interfaces: PM-01, PS-09 (45%)
- PERS.2.2 Roles with objectives and qualifications: PM-13, PS-09 (60%)
- PERS.2.3 Separation of roles: AC-05, CA-02 (75%)
- PERS.2.4 Responsibilities for roles: PL-02, PM-01 (60%)
- PERS.3.1 Confidentiality in the employment or service contract: PS-06 (85%)
- PERS.3.2 Procedural instructions on joining: AT-02, PL-04 (75%)
- PERS.3.3 Trade and business secrets: PL-04, PS-06 (70%)
- PERS.3.4 Job descriptions: PS-02, PS-09 (70%)
- PERS.3.5 Checking application documents: PM-13, PS-03 (30%)
- PERS.3.6 Trustworthiness of applicants: PS-02, PS-03 (85%)
- PERS.3.7 Onboarding new staff: AT-02, AT-03 (60%)
- PERS.4.1 Review of qualification needs: AT-03, PM-13 (60%)
- PERS.4.2 Role-specific training and awareness: AT-02, AT-03, SA-16 (90%)
- PERS.5.1 Disciplinary action: PS-08 (90%)
- PERS.5.2 Insider threats: AT-02, PM-12, SI-04 (85%)
- PERS.5.3 Trustworthiness check for security-critical roles: PS-02, PS-03 (90%)
- PERS.6.1 Procedure for staff leaving: AC-02, PE-02, PS-04 (80%)
- BES.1.1 Procurement: procedures and rules: SA-01, SR-01 (90%)
- BES.1.2 Procurement: regular review: SA-01, SR-01 (95%)
- BES.1.3 Register of suppliers and service providers: PM-30, SR-04 (45%)
- BES.1.4 Outsourcing strategy: PM-30, SA-09 (50%)
- BES.1.5 Authorising the cloud deployment model: CA-06, SA-09 (60%)
- BES.1.6 Documenting the cloud deployment model: PL-02, SA-09 (70%)
- BES.1.7 Agreeing shared responsibility with the cloud provider: SA-04, SA-09 (85%)
- BES.2.1 Recording procurement needs: CM-10, MA-06, PM-11, SA-02, SA-04 (60%)
- BES.2.2 Documenting jurisdiction and data location for cloud services: CM-12, SA-09 (60%)
- BES.2.3 Agreeing jurisdiction and data location with the cloud provider: SA-04, SA-09 (75%)
- BES.2.4 Consulting users on procurement needs: SA-02 (20%)
- BES.2.5 Consulting administrators on procurement needs: SA-02 (25%)
- BES.2.6 Outsourcing based on business process profiles: PM-11, SA-09 (55%)
- BES.3.1 Classifying supplier relationships: AC-21, PM-30, SR-06 (55%)
- BES.3.2 Supplier selection criteria: SR-03, SR-05, SR-06 (75%)
- BES.3.3 Excluding unreliable suppliers: SR-05, SR-11 (70%)
- BES.4.1 Classifying procurement projects: RA-02, RA-03 (60%)
- BES.4.2 Documenting procurement criteria: SA-04, SR-05 (80%)
- BES.4.3 Procurement based on the defined criteria: SA-04, SR-05 (75%)
- BES.4.4 Contract template for outsourcing: SA-04, SA-09 (80%)
- BES.4.5 Security by design: SA-04, SA-08, SA-15, SA-17, SC-04 (80%)
- BES.4.6 Security by default: SA-04, SA-08, SC-08, SC-28, SR-09 (80%)
- BES.4.7 ISMS at the service provider: SA-04, SA-09 (60%)
- BES.4.8 Evidence of conformity from the supplier: CA-02, SA-04, SR-06, SR-08 (75%)
- BES.4.9 Security screening of supplier staff: PS-03, PS-07, SA-21 (85%)
- BES.5.1 Security competences of supplier staff: AT-03, PS-07 (50%)
- BES.5.2 Service level agreement: SA-04, SA-09 (55%)
- BES.5.3 Compliance obligations in supplier contracts: SA-04, SA-09 (65%)
- BES.5.4 Information security controls in supplier contracts: SA-04, SA-09 (90%)
- BES.5.5 Rules on the use of data and assets: AC-02, SA-04, SA-09 (65%)
- BES.5.6 Rules for subcontracting: SA-09, SR-03, SR-04 (65%)
- BES.5.7 Training on delivered security mechanisms: SA-16 (95%)
- BES.5.8 Rights to intellectual property created under the contract: SA-04 (25%)
- BES.5.9 Handling changes to the service: SA-09, SA-10 (75%)
- BES.5.10 Handling incidents with suppliers: IR-04, IR-06, SA-10, SR-08 (65%)
- BES.5.11 Right to audit: SA-09, SR-06 (65%)
- BES.5.12 Duty to report on the effectiveness of security measures: SA-04, SA-09, SR-08 (75%)
- BES.5.13 Provision of backups by the provider: CP-09, SA-09 (55%)
- BES.5.14 Deletion rules for data held by the provider: SA-09, SI-12 (70%)
- BES.6.1 Revoking access rights on termination: AC-02, PS-07 (75%)
- BES.6.2 Deleting data on termination: MP-06, SA-04 (85%)
- BES.6.3 Data portability on termination: SA-04 (35%)
- BES.6.4 Handover of support services on termination: SA-22 (35%)
- BES.6.5 Handling retained records on termination: AU-11, SI-12 (60%)
- BES.6.6 Return of assets on termination: SA-04 (40%)
- BES.7.1 Incoming inspection against acceptance criteria: CA-02, CM-04, SA-04, SR-05 (75%)
- BES.7.2 Processes before connecting to the provider's network: CA-03, SC-07 (70%)
- BES.7.3 Consulting those involved in the outsourced process: no control mapped (0%)
- BES.7.4 Completeness of delivered documentation: CM-08, SA-04, SA-05, SA-09, SA-17, SR-04 (70%)
- BES.8.1 Keeping alternative suppliers available: SR-03, SR-05 (85%)
- BES.8.2 Procedures for transferring outsourced business processes: CP-02, CP-07 (50%)
- BES.8.3 Internal resources for the end of an outsourcing contract: CP-02, SA-02 (40%)
- BES.8.4 Custom implementation of critical components: SA-20 (90%)
- BES.8.5 Escrow agreements: SA-15, SA-22 (30%)
- DLS.1.1 Service providers: procedures and rules: SA-01, SA-09, SR-01 (70%)
- DLS.1.2 Service providers: regular review: SA-01, SR-01 (95%)
- DLS.2.1 Multi-factor authentication for online services: IA-02 (90%)
- DLS.2.2 Transport encryption to the service provider: SC-08, SC-13 (95%)
- DLS.2.3 Full encryption before transfer to the service provider: SA-09, SC-12, SC-28 (90%)
- DLS.3.1 Service provider compliance with security requirements: CA-02, SA-09, SR-06 (85%)
- DLS.3.2 Checkup of the outsourcing decision: RA-03, SR-06 (60%)
- DLS.3.3 Outsourcing strategy check: PM-11, PM-30 (55%)
- DLS.3.4 Consulting the service provider on security measures: SA-09 (20%)
- DLS.3.5 Blocking unreliable service providers: AC-20, SR-03, SR-05, SR-06 (65%)
- DLS.3.6 Portability of the outsourced process: CP-04, CP-07 (50%)
- DLS.4.1 Decommissioning a service before the contract ends: AC-02, CP-04, PE-02, SA-04 (55%)
- TEST.1.1 Changes and tests: procedures and rules: CM-01, CM-03, CM-09 (90%)
- TEST.1.2 Changes and tests: regular review: CM-01 (95%)
- TEST.1.3 Restricting changes to administrators: AC-06, CM-05 (90%)
- TEST.2.1 Version history of changes: CM-02, CM-03 (85%)
- TEST.2.2 Impact assessment before changes: CM-03, CM-04 (85%)
- TEST.3.1 Security testing of changes: CM-03, CM-04, SA-03, SA-11, SI-07, SR-05 (75%)
- TEST.3.2 Test coverage: PM-14, SA-11 (65%)
- TEST.4.1 Authorisation of changes: AC-05, CM-03, CM-04 (85%)
- TEST.4.2 Signature on the approval statement: AU-10, CM-03 (70%)
- TEST.4.3 Fallback solution for changes: CM-02, CP-09, CP-10 (75%)
- TEST.4.4 Rules for emergency changes: CM-03, CM-09, SI-02 (50%)
- TEST.5.1 Informing groups affected by a change: CM-03 (45%)
- TEST.5.2 Encrypted deployment: SC-08, SC-13 (85%)
- TEST.5.3 Gradual rollout of changes: CM-03 (25%)
- TEST.5.4 Persistence of changes: CM-02, CM-04, SI-06 (60%)
- TEST.5.5 Deployment retrospective: CM-03, CM-04 (55%)
- GEB.1.1 Buildings: procedures and rules: PE-01 (95%)
- GEB.1.2 Buildings: regular review: PE-01 (95%)
- GEB.1.3 Authorisation of sites for assets: CA-02, PE-17, PE-23 (50%)
- GEB.1.4 Placing assets outside exposed areas: PE-18, PE-23 (90%)
- GEB.1.5 Structural plans of buildings and utilities: no control mapped (0%)
- GEB.2.1 Installing security perimeters: PE-03 (85%)
- GEB.2.2 Documentation of public areas: PE-03 (55%)
- GEB.2.3 Reconnaissance from public space: PE-18, RA-06 (40%)
- GEB.2.4 Electromagnetic shielding: CA-02, PE-19 (65%)
- GEB.3.1 Monitoring of entry points: PE-03, PE-06 (90%)
- GEB.3.2 Registration and reception areas: PE-03, PE-08 (65%)
- GEB.3.3 Authentication before entry: PE-02, PE-03, PE-08 (90%)
- GEB.3.4 Visible authorisation badges: PE-02, PL-04 (60%)
- GEB.3.5 Burglary resistance: PE-03 (60%)
- GEB.3.6 Intrusion alarm systems: PE-06 (85%)
- GEB.3.7 Review of physical access controls: CA-02, CA-08, PE-06 (80%)
- GEB.4.1 Setting up secure areas: PE-03 (75%)
- GEB.4.2 Separate authorisation for secure areas: PE-02, PE-03 (85%)
- GEB.4.3 Security airlocks at access points: PE-03 (90%)
- GEB.4.4 Single-person entry systems at access points: PE-03 (80%)
- GEB.5.1 Delivery access point: PE-03, PE-16 (80%)
- GEB.5.2 Protection against tampering: PE-03, SR-09 (85%)
- GEB.5.3 Physical microsegmentation: PE-03, SC-32 (55%)
- GEB.6.1 Access to output devices: PE-05 (90%)
- GEB.6.2 Protected placement of IT systems: PE-03, PE-18 (85%)
- GEB.6.3 Network components in technical infrastructure rooms: PE-03, PE-04, PE-18 (80%)
- GEB.6.4 Standard-compliant data centres: PE-18, PE-23 (30%)
- GEB.7.1 Key custodians for buildings and rooms: PE-03 (60%)
- GEB.7.2 Safekeeping of keys: PE-03, PL-04 (65%)
- GEB.7.3 Key audit for buildings and rooms: PE-03 (90%)
- GEB.8.1 Separate storage of business-critical media: MP-04 (90%)
- GEB.8.2 Dust and dirt protection for archived media: MP-04, PE-14 (45%)
- GEB.8.3 Protection of storage media from fire damage: CP-09, MP-04 (65%)
- GEB.8.4 Monitoring media-friendly temperature and humidity: PE-14 (90%)
- GEB.9.1 Standard-compliant power supply: PE-09, PE-11 (60%)
- GEB.9.2 Load test of the power supply: PE-11 (40%)
- GEB.9.3 Emergency shutoff for utilities: PE-10 (90%)
- GEB.9.4 Surge protection: PE-09, PE-21 (75%)
- GEB.9.5 Structured data cabling: PE-04 (50%)
- GEB.9.6 Access to technical infrastructure rooms: PE-02, PE-03 (90%)
- GEB.9.7 Other uses of technical infrastructure rooms: PE-18 (35%)
- GEB.10.1 Climate control: PE-14 (75%)
- GEB.10.2 Fire protection: PE-13 (60%)
- GEB.10.3 Protection against water damage: PE-15, PE-18 (65%)
- GEB.10.4 Lightning protection systems: PE-09, PE-21 (45%)
- GEB.10.5 Static-dissipative floor covering: PE-14 (15%)
- SENS.1.1 Awareness: procedures and rules: AT-01, AT-02, AT-03 (90%)
- SENS.1.2 Measuring the success of awareness: AT-02, AT-04, AT-06, PM-06 (70%)
- SENS.2.1 Awareness of the protection goals: AT-02 (80%)
- SENS.2.2 Reporting channels and information sources: AT-02, IR-06, IR-07 (70%)
- SENS.2.3 Using encryption and signature functions: AT-02, SA-05 (65%)
- SENS.2.4 Use of unauthorised assets: AC-20, AT-02, CM-07, CM-11, MP-07, PL-04 (85%)
- SENS.2.5 Areas of responsibility and their protection needs: AT-02, AT-03 (65%)
- SENS.2.6 Bypassing security functions: AT-02, PL-04 (70%)
- SENS.2.7 Changing security configurations: AT-02, PL-04 (70%)
- SENS.2.8 Reporting security events: AT-02, IR-06, PL-04 (90%)
- SENS.3.1 Risks of malware: AT-02 (85%)
- SENS.3.2 Opening files in a sandbox: AT-02, SC-44 (75%)
- SENS.3.3 Converting suspicious files to a non-executable format: AT-02 (55%)
- SENS.4.1 Handling personal authenticators: AT-02, IA-05, PL-04 (80%)
- SENS.4.2 Shared use of accounts: AC-02, AT-02, IA-02, PL-04 (85%)
- SENS.4.3 Logging off after use: AC-11, AC-12, AT-02 (85%)
- SENS.5.1 Structured data filing: AT-02, PL-04 (55%)
- SENS.5.2 Passing on information: AC-21, AT-02 (75%)
- SENS.5.3 Passing on contact details: AT-02, PL-04 (75%)
- SENS.5.4 Residual and additional data in documents: AT-02 (55%)
- SENS.5.5 Deletion at the end of retention periods: AT-02, MP-06, PL-04, SI-12 (80%)
- SENS.5.6 Destroying paper documents: AT-02, MP-06, SI-12 (85%)
- SENS.6.1 Scanning received removable media: AT-02, PL-04, SI-03 (85%)
- SENS.6.2 Encrypting removable media: AT-02, MP-05, PL-04, SC-28 (85%)
- SENS.7.1 Awareness for specific target objects: AT-02, AT-03 (80%)
- SENS.7.2 Virus scan of files from external sources: AT-02, SI-03 (80%)
- SENS.7.3 Confidential data in automatic replies: AT-02, PL-04 (65%)
- SENS.7.4 Spam: deleting or reporting: AT-02, IR-06 (80%)
- SENS.7.5 Spam: not replying: AT-02 (75%)
- SENS.7.6 Spam: opening links: AT-02, PL-04 (85%)
- SENS.7.7 Spam: opening attachments: AT-02, PL-04 (85%)
- SENS.7.8 Recognising forged emails: AT-02 (85%)
- SENS.7.9 Active content in office documents: AT-02, SC-18 (80%)
- SENS.7.10 Disconnecting unneeded host-guest connections: AT-02, CM-07 (65%)
- SENS.7.11 Covert recording in video conferences: AT-02, PL-04 (65%)
- SENS.7.12 Risks of public WLANs: AC-19, AT-02 (70%)
- SENS.7.13 Risks of unencrypted WLANs: AC-19, AT-02 (70%)
- SENS.7.14 Use of unauthorised WLANs: AC-19, AT-02, PL-04 (80%)
- SENS.7.15 Social engineering calls: AT-02 (90%)
- SENS.7.16 Voicemail PINs and similar credentials: AT-02, IA-05 (85%)
- SENS.7.17 Unencrypted telephone calls: AT-02, PL-04 (65%)
- SENS.7.18 Mobile devices in secure areas: AT-02, PL-04, SC-42 (85%)
- SENS.7.19 Unencrypted SMS or MMS: AT-02, PL-04 (70%)
- SENS.7.20 Authenticating the other party in a conversation: AC-21, AT-02 (75%)
- SENS.7.21 Legal uncertainty of faxes: AT-02 (55%)
- SENS.7.22 Unencrypted fax lines: AT-02 (60%)
- SENS.7.23 Geolocation on mobile devices: AT-02, SC-42 (75%)
- SENS.7.24 Certificate warnings: AT-02, PL-04 (70%)
- SENS.8.1 Screen lock: AC-11, AT-02, PL-04 (95%)
- SENS.8.2 Clean desk: AT-02, MP-04, PL-04 (85%)
- SENS.8.3 Risks of using mobile devices: AC-19, AT-02 (75%)
- SENS.8.4 Closing doors and windows: AT-02, PE-03, PL-04 (70%)
- SENS.8.5 Bringing in unauthorised IT systems: AT-02, CM-07, PE-16, PL-04, SC-42 (80%)
- SENS.8.6 Escorting external visitors: AT-02, PE-03, PL-04 (90%)
- SENS.8.7 Supervising external visitors in sensitive areas: AT-02, MA-05, PE-03, PL-04 (90%)
- SENS.8.8 Safekeeping of IT systems and media on site: AT-02, MP-04 (75%)
- SENS.8.9 Return of assets no longer needed: AT-02, PL-04, PS-04, PS-05 (80%)
- SENS.8.10 Avoiding fire loads near technical rooms: AT-02, PL-04 (55%)
- SENS.8.11 Use of fire protection equipment: AT-03, PE-13 (90%)
- SENS.8.12 Use of water protection equipment: AT-03, PE-15 (75%)
- SENS.9.1 Processing confidential information in public: AC-19, AT-02, PL-04 (75%)
- SENS.9.2 Caution against eavesdropping in mobile working: AT-02, PE-17 (70%)
- SENS.9.3 Safekeeping of IT systems and media away from the office: AC-19, AT-02, MP-05, PL-04 (80%)
- SENS.9.4 Mobile working with paper documents: AT-02, MP-05 (75%)
- SENS.9.5 Taking IT systems and media to mobile working: AT-02, PL-04 (65%)
- SENS.9.6 Taking IT systems and media abroad: AT-02, CM-02, PL-04 (75%)
- SENS.9.7 Travel and safety advice for trips outside Europe: AT-02 (55%)
- SENS.10.1 Basic principles of system administration: AT-03 (80%)
- SENS.10.2 Handling privileged access rights: AC-06, AT-03, IA-05, PL-04 (85%)
- SENS.10.3 System administration: security incidents: AT-03, IR-02 (90%)
- SENS.10.4 System administration: structured cabling: AT-03, PE-04 (55%)
- SENS.10.5 System administration: internet use: AC-06, AT-03, PL-04 (90%)
- SENS.11.1 Awareness for top management: AT-02, AT-03 (75%)
- SENS.11.2 Leading by example: AT-02, AT-03 (55%)
- SENS.11.3 Whaling attacks on executives: AT-02, AT-03 (85%)
- SENS.12.1 High risks from the risk analysis: AT-02, RA-03 (80%)
- ARCH.1.1 Architecture: procedures and rules: PL-08, SC-01 (85%)
- ARCH.1.2 Architecture: regular review: PL-08, SC-01 (90%)
- ARCH.2.1 Network segments: PL-08, SC-07, SC-32 (85%)
- ARCH.2.2 Restricting connections between segments: AC-04, CA-09, PE-04, SC-07, SC-32 (85%)
- ARCH.2.3 Microsegmentation: AC-04, SC-07 (80%)
- ARCH.2.4 Inventory of networks: CA-03, CA-09, CM-08, PL-02 (75%)
- ARCH.2.5 Network diagram: CM-02, PL-02, PL-08 (75%)
- ARCH.2.6 Network topology monitoring: CA-07, CM-08, SI-04 (80%)
- ARCH.3.1 WLAN coverage: AC-18 (45%)
- ARCH.3.2 Restricting WLAN signals in secure areas: AC-18, PE-19 (80%)
- ARCH.3.3 Organisation-specific WLAN names (SSIDs): AC-18, CM-06 (60%)
- ARCH.3.4 Encrypted WLAN connections: AC-18, SC-08, SC-13 (90%)
- ARCH.4.1 Network access control: CA-09, CM-08, IA-03, SC-07 (85%)
- ARCH.4.2 Authorised routing: AC-04, CM-03, CM-05 (80%)
- ARCH.4.3 Authentication of routing protocols: IA-03, SC-08, SC-23 (80%)
- ARCH.5.1 Restricting and inspecting connections: AC-04, CM-07, PL-08, SC-07, SI-03, SI-04 (80%)
- ARCH.5.2 Blocking direct connections to public networks: SC-07 (95%)
- ARCH.6.1 Controlled paths for wide area connections: AC-04, SC-07, SC-08 (70%)
- ARCH.6.2 Encryption of wide area connections: AC-17, SC-08, SC-13 (90%)
- ARCH.7.1 Dedicated host systems for servers: CM-07, SC-32 (85%)
- ARCH.7.2 Dedicated hardware for host systems: SC-32 (65%)
- ARCH.7.3 Separating development and test environments: CM-04, SC-32 (80%)
- ARCH.8.1 Redundancy in the core network: SI-13 (55%)
- ARCH.8.2 Redundant telephony connections: CP-08 (85%)
- ARCH.8.3 Redundant servers: CP-09, SC-36, SI-13 (80%)
- ARCH.9.1 Sizing the network connection: CP-02, SC-05 (50%)
- ARCH.9.2 Load balancing: SC-05, SC-36 (60%)
- ARCH.9.3 Automatic scaling: SC-05 (40%)
- ARCH.9.4 Content delivery network: SC-05, SC-36 (70%)
- ARCH.9.5 Protection against volumetric denial-of-service attacks: SC-05 (90%)
- BER.1.1 Access rights: procedures and rules: AC-01, IA-01 (90%)
- BER.1.2 Access rights: regular review: AC-01, IA-01 (95%)
- BER.1.3 Inventory of authentication and authorisation systems: CM-08 (60%)
- BER.1.4 Inventory of access rights: AC-02, IA-04 (75%)
- BER.2.1 Identity linked to one person or IT system: IA-02, IA-03, IA-04, IA-12 (90%)
- BER.2.2 Restricting who can manage identities: AC-06, IA-04 (75%)
- BER.2.3 Checking identity master data: AC-02, SI-18 (50%)
- BER.2.4 Logging changes to identity master data: AC-02, AU-02, AU-03, AU-12 (85%)
- BER.2.5 Deactivation of identities on leaving: AC-02, PS-04 (85%)
- BER.2.6 Deletion of identities after the retention period: AC-02, SI-12 (75%)
- BER.3.1 Central management of accounts: AC-02, IA-13, PL-09 (90%)
- BER.3.2 Authorisation of new accounts: AC-02, IA-04 (95%)
- BER.3.3 Restricting account management to administrators: AC-02, AC-06 (85%)
- BER.3.4 Logging changes to accounts: AC-02, AU-02, AU-09, AU-12 (90%)
- BER.3.5 Account linked to one identity: AC-02, IA-02, IA-04 (85%)
- BER.3.6 Privileged accounts: AC-02, AC-06 (90%)
- BER.3.7 Single sign-on: IA-02, IA-13 (90%)
- BER.3.8 Account hints in login error messages: IA-06, SI-11 (85%)
- BER.3.9 Event-driven deactivation of accounts: AC-02, PS-04 (90%)
- BER.3.10 Login attempt limit on IT systems: AC-07 (95%)
- BER.3.11 Login attempt limit for applications: AC-07 (95%)
- BER.3.12 System lock after inactivity: AC-11, AC-12 (95%)
- BER.3.13 Application lock after inactivity: AC-11, AC-12, IA-11 (85%)
- BER.3.14 Blocking the reuse of accounts: IA-04 (90%)
- BER.3.15 Deletion of accounts after the retention period: AC-02, SI-12 (80%)
- BER.3.16 Banning shared accounts: AC-02, IA-02 (90%)
- BER.3.17 Shared accounts: multi-factor authentication: IA-02 (85%)
- BER.3.18 Shared accounts: documenting handovers: AC-02, IA-02 (60%)
- BER.3.19 Shared accounts: password change on leaving: AC-02, IA-05 (95%)
- BER.3.20 Caching of login credentials: IA-05 (70%)
- BER.3.21 Service accounts: IA-05, SC-12 (65%)
- BER.3.22 Emergency access accounts: AC-02, AC-03 (60%)
- BER.3.23 Emergency access account for directory services: AC-02, AC-03 (60%)
- BER.3.24 Alternative authentication on IT systems: AC-07, IA-05 (65%)
- BER.3.25 Alternative authentication for applications: AC-07, IA-05 (65%)
- BER.4.1 Principle of least privilege: AC-02, AC-03, AC-06 (90%)
- BER.4.2 Authorisation of access rights: AC-02 (85%)
- BER.4.3 Justification of access rights: AC-02 (60%)
- BER.4.4 Review of access rights: AC-02, AC-06 (90%)
- BER.4.5 System functions without authentication: AC-14 (95%)
- BER.4.6 Application functions without authentication: AC-14 (95%)
- BER.4.7 IT system linked to one account: AC-02, AC-03 (60%)
- BER.4.8 Revocation of access rights: AC-02, AC-03, PS-04, PS-05 (90%)
- BER.5.1 Issuing, registering and assigning authenticators: IA-05, IA-12 (90%)
- BER.5.2 Resetting and replacing authenticators: IA-05 (85%)
- BER.5.3 Procedure for revoking authenticators: IA-05, PS-04 (90%)
- BER.5.4 Only established cryptography for authenticators: IA-05, SC-13 (85%)
- BER.5.5 Disabling biometric-only authentication on IT systems: IA-02, IA-05 (55%)
- BER.5.6 Disabling preconfigured authenticators on IT systems: CM-06, IA-05 (85%)
- BER.5.7 Disabling preconfigured authenticators in applications: CM-06, IA-05 (85%)
- BER.5.8 Multi-factor authentication at the perimeter: AC-17, IA-02 (70%)
- BER.5.9 Multi-factor authentication for far-reaching access rights: IA-02 (90%)
- BER.5.10 Restricting access to authenticators on each IT system: AC-03, IA-05 (90%)
- BER.5.11 Restricting access to authenticators in each application: AC-03, IA-05 (90%)
- BER.5.12 Two-person access through split authenticators: AC-03 (50%)
- BER.5.13 Identity check before resetting or replacing authenticators: IA-05, IA-12 (70%)
- BER.5.14 Blocking compromised authenticators: IA-05 (85%)
- BER.6.1 Password manager for users: IA-05 (95%)
- BER.6.2 Blocking password reuse: IA-05 (50%)
- BER.6.3 Blocking trivial passwords: IA-05 (95%)
- BER.6.4 Criteria for password quality: IA-05 (85%)
- BER.6.5 Event-driven password changes: IA-05 (75%)
- BER.6.6 Monitoring credentials for compromise: AU-13, IA-05 (70%)
- BER.7.1 Established algorithms for key generation: SC-12, SC-13 (85%)
- BER.7.2 Key length when generating keys: SC-12, SC-13 (85%)
- BER.7.3 Register of public keys: SC-12, SC-17 (65%)
- BER.7.4 Key generation on secure IT systems: SC-12 (50%)
- BER.7.5 Criteria for random number quality in key generation: SC-12, SC-13 (50%)
- BER.7.6 Established algorithms for key transport: SC-08, SC-12, SC-13 (85%)
- BER.7.7 Transport of private keys only with approval: IA-05, SC-12 (55%)
- BER.7.8 Established algorithms for key use: SC-13 (90%)
- BER.7.9 Purpose binding for keys: SC-12, SC-17 (55%)
- BER.7.10 Stopping encryption and signing with expired keys: SC-12 (50%)
- BER.7.11 Integrity of secret keys: SC-12, SI-07 (60%)
- BER.7.12 Authenticity of public keys: IA-05, SC-17 (85%)
- BER.7.13 Validity of keys: IA-05, SC-12 (80%)
- BER.7.14 Checking keys before they expire: SC-12 (50%)
- BER.7.15 Procedure for retiring secret keys after use: SC-12 (80%)
- BER.7.16 Rules for key certification: SC-12, SC-17 (65%)
- NOT.1.1 Emergency planning: procedures and rules: CP-01, CP-02 (85%)
- NOT.1.2 Emergency planning: regular review: CP-01, CP-02 (95%)
- NOT.2.1 Emergency and crisis organisation: procedures and rules: CP-02, CP-04 (60%)
- NOT.3.1 Restart plan for time-critical systems and applications: CP-02, CP-10 (85%)
- NOT.3.2 Business continuity plan for time-critical processes: CP-02 (75%)
- NOT.3.3 Awareness of what to do in an emergency: CP-03 (90%)
- NOT.3.4 Functional test of emergency plans: CP-04 (95%)
- NOT.3.5 Fallback telecommunications services: CP-08, SC-47 (90%)
- NOT.3.6 Security mechanisms for emergencies: CP-13 (90%)
- NOT.4.1 Documentation of backup sources: CP-09 (75%)
- NOT.4.2 Backup of IT systems: CP-09 (95%)
- NOT.4.3 Backup of applications: CP-09 (90%)
- NOT.4.4 Automated backup: CP-09 (50%)
- NOT.4.5 Archiving data needed in the long term: SI-12 (50%)
- NOT.4.6 Protected storage of backups: CP-09, MP-04 (90%)
- NOT.4.7 Versioned backups: CP-09 (50%)
- NOT.4.8 Encrypted backups: CP-09, SC-13 (95%)
- NOT.4.9 Dedicated storage media for backups: CP-09 (45%)
- NOT.4.10 Separate storage of backups: CP-06, CP-09 (90%)
- NOT.4.11 Media archive: CP-09, MP-04 (75%)
- NOT.4.12 Geo-redundant storage of backups: CP-06, CP-09 (85%)
- NOT.4.13 Data sovereignty for data held by service providers: CP-09, SA-09 (55%)
- NOT.4.14 Offline copy of backups: CP-09, SC-28 (80%)
- NOT.4.15 Restore procedure: CP-02, CP-10 (85%)
- NOT.4.16 Testing backups: CP-04, CP-09 (90%)
- NOT.4.17 Testing applications after a restore: CP-04, CP-09 (85%)
- DET.1.1 Detection: procedures and rules: AU-01, IR-01, SI-01 (85%)
- DET.1.2 Detection: regular review: AU-01, IR-01, SI-01 (95%)
- DET.2.1 Reporting procedure for security events: IR-06, IR-07, IR-08 (75%)
- DET.2.2 Security operations center: IR-04, IR-08 (90%)
- DET.2.3 Round-the-clock on-call duty: IR-04 (50%)
- DET.3.1 Logging of security-relevant events: AC-06, AU-02, AU-03, AU-11, AU-12 (85%)
- DET.3.2 Integration of cloud services into the audit log: AU-12, AU-16 (75%)
- DET.3.3 Filtering of unneeded log content: AU-02, AU-03 (70%)
- DET.3.4 Log storage capacity: AU-04, AU-05 (90%)
- DET.3.5 Audit-proof logging: AU-09 (85%)
- DET.3.6 Non-repudiation: AU-10 (90%)
- DET.4.1 Monitoring of logging: AU-05, SI-06 (85%)
- DET.4.2 Automated attack detection: SI-03, SI-04 (90%)
- DET.4.3 Monitoring of attack detection: SI-04, SI-06 (75%)
- DET.4.4 Changes to automated security policies: AC-02, CM-03, CM-06 (80%)
- DET.4.5 Unwanted data leakage: SC-07, SI-04, SI-20 (85%)
- DET.4.6 Anomalous application use: AC-02, AU-06, SI-04 (85%)
- DET.4.7 Expiry of domain names: no control mapped (0%)
- DET.4.8 Issue of new HTTPS certificates: SC-17 (35%)
- DET.4.9 Check-up for tampering: PE-03, SR-09, SR-10 (90%)
- DET.4.10 Host-based decoys: SC-26, SI-20 (80%)
- DET.4.11 Anomalies in networks and at the perimeter: AC-17, SC-07, SC-26, SI-04 (85%)
- DET.4.12 Monitoring of network availability: CA-07, SC-05 (50%)
- DET.4.13 Availability of the host system: CA-07, SC-05 (50%)
- DET.4.14 Availability of the application: CA-07, SC-05 (50%)
- DET.4.15 Resource utilisation of host systems: SC-05 (55%)
- DET.4.16 Resource utilisation of server services: SC-05 (50%)
- DET.4.17 Application-based capacity management: CA-07, SC-05 (45%)
- DET.4.18 Public email blocklists: no control mapped (0%)
- DET.4.19 Unauthorised transmitters: RA-06, SI-04 (85%)
- DET.5.1 Timely vulnerability management: RA-05, SI-02 (90%)
- DET.5.2 Vulnerability register: CA-05, RA-05 (75%)
- DET.5.3 Vulnerability scans: RA-05 (90%)
- DET.5.4 Regular penetration tests: CA-08 (90%)
- DET.5.5 Red teaming: CA-08 (95%)
- DET.5.6 Threat hunting: RA-10 (95%)
- DET.5.7 Covert channel analysis: SC-31, SI-04 (85%)
- DET.5.8 Threat analysis: AU-13, PM-16, RA-03, RA-05, SI-05 (85%)
- DET.5.9 External vulnerability reports: RA-05, SI-02 (80%)
- DET.5.10 Timely patch management: CM-03, CM-14, SI-02, SI-07 (85%)
- DET.6.1 Assessment of security events: AU-06, IR-04, IR-05, SI-04 (90%)
- DET.6.2 Assessment of incoming files: SC-44, SI-03 (80%)
- REA.1.1 Incident handling: procedures and rules: IR-01, IR-04, IR-08 (95%)
- REA.1.2 Incident handling: regular review: IR-01, IR-08 (95%)
- REA.1.3 Incident handling exercises: IR-02, IR-03 (90%)
- REA.2.1 Triage and first response: IR-04 (65%)
- REA.2.2 Automatic first response: IR-04, SI-04 (90%)
- REA.2.3 Documenting incidents: IR-05 (90%)
- REA.2.4 Diagnostic data for incidents: AU-12, IR-04, SI-04 (80%)
- REA.2.5 IT forensics: AU-09, IR-04, IR-05, IR-07 (65%)
- REA.2.6 Root cause analysis and remediation: IR-04, IR-05, IR-06, IR-08, SI-02 (80%)
- REA.3.1 Improvement through lessons learned: AT-02, IR-04, IR-05 (70%)
- KONF.1.1 Configuration: procedures and rules: CM-01, CM-09 (90%)
- KONF.1.2 Configuration: regular review: CM-01 (95%)
- KONF.1.3 Management of configuration tools: CM-08, SR-04 (65%)
- KONF.1.4 Restricting access to configuration documentation: AC-03, AC-06, MP-02 (85%)
- KONF.1.5 Encryption of configuration secrets: IA-05, SC-12, SC-28 (90%)
- KONF.2.1 Baseline configuration for systems: CM-02, CM-06 (95%)
- KONF.2.2 Cryptographic methods in IT systems: SC-12, SC-13 (80%)
- KONF.2.3 Default credentials in IT systems: IA-05 (95%)
- KONF.2.4 Disabling unneeded system functions: CM-06, CM-07, SC-17 (90%)
- KONF.2.5 Review of the system configuration: CM-03, CM-06 (90%)
- KONF.2.6 Mobile device management: AC-19, CM-06 (75%)
- KONF.2.7 Sovereign tools: SA-09, SR-03, SR-05 (35%)
- KONF.2.8 Alternative administrative access: AC-02, CP-11, SC-47 (60%)
- KONF.2.9 Secure and authenticated boot process: SI-07 (85%)
- KONF.3.1 Cryptographic hardware storage: SC-12, SC-28 (85%)
- KONF.3.2 Storage encryption: AC-19, SC-13, SC-28 (95%)
- KONF.3.3 SIM PIN: AC-19, IA-07 (50%)
- KONF.3.4 Physical theft protection: AC-19, PE-03 (40%)
- KONF.3.5 Remote location detection: CM-08, PE-20 (85%)
- KONF.3.6 Remote wipe or lock: AC-19, MP-06 (80%)
- KONF.3.7 Restricting connected peripherals: CM-07, MP-07, SC-41 (90%)
- KONF.3.8 Restricting removable media: CM-07, MP-07, SC-18 (85%)
- KONF.4.1 Connection to a directory service: AC-02, IA-02, IA-05, IA-13 (75%)
- KONF.4.2 Connection to DNS servers: CM-06, SC-08, SC-21 (75%)
- KONF.4.3 Authentication of remote maintenance functions: AC-17, IA-02, MA-04 (90%)
- KONF.4.4 Restricting remote maintenance functions: AC-17, CM-07, MA-04 (85%)
- KONF.4.5 Time sources: SC-45 (85%)
- KONF.5.1 Authentication to the system: AC-11, CM-05, IA-02 (85%)
- KONF.5.2 One account signed in at a time: AC-10 (55%)
- KONF.6.1 Minimum required access rights for applications: AC-03, AC-06, AC-19, CM-07, SC-39, SC-50 (85%)
- KONF.6.2 Shared directories: AC-03, AC-06 (85%)
- KONF.6.3 Kiosk mode: SI-14 (85%)
- KONF.6.4 Privileged system functions: AC-02, AC-03, AC-06, CM-05 (90%)
- KONF.6.5 Dynamic access control in the system: AC-02, AC-03, AC-16 (80%)
- KONF.6.6 Keeping each account's data separate: AC-03, AC-06, SC-50 (80%)
- KONF.6.7 Privileged application functions: AC-03, AC-06 (85%)
- KONF.6.8 Access rights of the web server process: AC-03, AC-06, CM-07 (85%)
- KONF.6.9 Access to code on web servers: AC-03, AC-22 (75%)
- KONF.6.10 Listing directory contents on web servers: CM-06, CM-07 (85%)
- KONF.6.11 Restricting uploads to web servers: AC-03, SC-06, SI-10 (80%)
- KONF.6.12 Moderation of public conference calls: SC-15 (30%)
- KONF.6.13 Dynamic access control in the application: AC-02, AC-03, AC-16 (80%)
- KONF.6.14 Browser sandboxing: SC-18, SC-39 (85%)
- KONF.6.15 Virtualised browser environment: SC-18, SC-44 (80%)
- KONF.6.16 Data exchange between virtualised clients: AC-04, SC-04, SC-07 (85%)
- KONF.7.1 Real-time malware scanner: SI-03 (95%)
- KONF.7.2 Regular malware scans: SI-03 (95%)
- KONF.7.3 Host-based intrusion detection: SI-04, SI-07 (90%)
- KONF.7.4 Intrusion detection based on network traffic: SI-04 (90%)
- KONF.7.5 Alerting on possible malware: SI-03, SI-04 (90%)
- KONF.7.6 Automatic updates of malware detection: SI-03 (95%)
- KONF.7.7 Regular testing of malware protection: SI-03, SI-06 (90%)
- KONF.7.8 Dual-engine strategy for malware scanning: PL-08, SC-29, SI-03 (80%)
- KONF.7.9 Restricting application installation: CM-05, CM-11 (85%)
- KONF.7.10 Restricting application execution: CM-07 (90%)
- KONF.7.11 Restricting software libraries: CM-07, SI-07 (75%)
- KONF.7.12 Restricting scripts: CM-07, SC-18 (80%)
- KONF.7.13 Restricting system calls: AC-06, CM-07 (65%)
- KONF.7.14 Code signing in the operating system kernel: CM-14, SI-07 (90%)
- KONF.7.15 Local firewall: CM-07, SC-07 (90%)
- KONF.7.16 Anti-exploit protection: SI-07, SI-16 (80%)
- KONF.8.1 Automatic check for security updates: SI-02 (95%)
- KONF.8.2 Automatic updates for applications: SI-02 (95%)
- KONF.9.1 Storage limit for the user environment: SC-06 (85%)
- KONF.9.2 Limiting host computing power: SC-06 (85%)
- KONF.9.3 Alternative components for critical functions: CP-08, SI-13 (70%)
- KONF.10.1 Baseline configuration for applications: CM-02, CM-06 (95%)
- KONF.10.2 Cryptographic methods in applications: SC-12, SC-13 (80%)
- KONF.10.3 Default credentials in applications: IA-05 (95%)
- KONF.10.4 Disabling unneeded application functions: CM-06, CM-07 (90%)
- KONF.10.5 Checking the configuration against the baseline: CM-03, CM-06 (90%)
- KONF.11.1 Authentication before access to protected data: IA-02, IA-08, IA-09 (85%)
- KONF.11.2 Waiting room for video conferences: IA-02, IA-08, SC-15 (75%)
- KONF.11.3 Publication of domain information in DNS: SC-22 (75%)
- KONF.11.4 Protection against guessing access links: AC-07, SC-23 (50%)
- KONF.11.5 Restricting unauthenticated telephony connections: AC-04, AC-14 (70%)
- KONF.11.6 Overview of signed-in connections: AC-09 (45%)
- KONF.11.7 Restricting application interfaces: AC-04, CA-03, CM-07, SC-07 (80%)
- KONF.11.8 Encryption of sensitive data at rest: IA-05, SC-28 (90%)
- KONF.12.1 Input validation: CP-10, IA-04, IA-05, SC-08, SC-18, SI-07, SI-10 (70%)
- KONF.12.2 Encryption status of the current connection: SC-08 (30%)
- KONF.12.3 Cookies in web browsers: CM-07 (40%)
- KONF.12.4 Storage of credentials in web browsers: IA-05 (90%)
- KONF.12.5 Autofill of data in web browsers: CM-07 (50%)
- KONF.12.6 Persistent browser history: CM-07, SI-14 (70%)
- KONF.12.7 Extended attributes on file servers: AC-03, AC-16 (70%)
- KONF.12.8 Joining conferences with video and audio off by default: SC-15 (70%)
- KONF.12.9 No covert recording in video conferences: PT-05, SC-15, SC-42 (70%)
- KONF.12.10 Cookie attributes in web applications: SC-08, SC-23 (70%)
- KONF.12.11 Anonymous or pseudonymous communication: SC-30 (30%)
- KONF.12.12 Connection log for users: AU-02, AU-03, AU-12 (65%)
- KONF.12.13 Fax transmission report: AU-10, AU-12 (60%)
- KONF.12.14 False information in DNS answers: SC-20, SC-21 (65%)
- KONF.13.1 Filtering harmful messages: SC-18, SI-03, SI-08 (90%)
- KONF.13.2 Authenticity of messages: AU-10, SC-08, SI-08 (70%)
- KONF.13.3 Cryptographic signature of the mail server: AU-10, SC-08, SC-13 (70%)
- KONF.13.4 Cryptographic signature by users: AU-10, SC-17 (80%)
- KONF.13.5 Publication of the sending authorisation in DNS: SI-08 (35%)
- KONF.13.6 Publication of the server signature in DNS: SC-12 (50%)
- KONF.13.7 TLS reports for email: AU-06, SI-04 (50%)
- KONF.13.8 Email authentication reports (DMARC): AU-06, SI-04 (50%)
- KONF.13.9 Publication of the email authentication policy (DMARC): SI-08 (35%)
- KONF.13.10 Authenticating server certificates through DNS: SC-17, SC-21, SC-23 (75%)
- KONF.13.11 Strict transport security for mail (MTA-STS): SC-08, SC-23 (75%)
- KONF.14.1 Encryption in transit: CM-07, SC-08, SC-13 (90%)
- KONF.14.2 Source port randomisation for DNS: SC-21, SC-30 (50%)
- KONF.14.3 Iterative answers to DNS queries from the internet: CM-07, SC-22 (65%)
- KONF.14.4 Caching frequently used data on mobile devices: SC-36 (35%)
- KONF.14.5 Timeout for network connections: AC-12, SC-10 (90%)
- KONF.15.1 Limiting storage space per account or tenant: SC-06 (85%)
- KONF.15.2 Limiting computing power per account or tenant: SC-06 (85%)
- KONF.15.3 Protection against denial of service: SC-05 (90%)
- KONF.15.4 Overcommitment of virtualised resources: SC-06 (65%)
- DEV.1.1 Development: procedures and rules: SA-01, SA-03, SA-15 (90%)
- DEV.1.2 Development: regular review: SA-01, SA-15 (95%)
- DEV.2.1 Security by design in the architecture: PL-08, SA-08, SA-11, SA-17 (90%)
- DEV.2.2 Documenting the software architecture: PL-08, SA-17 (85%)
- DEV.2.3 Running with minimal privileges: AC-06, SA-08, SA-17 (85%)
- DEV.2.4 Restricting write access to source code: AC-06, CM-05, SA-10 (90%)
- DEV.2.5 Restricting access to application credentials: AC-03, AC-06, IA-05 (85%)
- DEV.2.6 Resistance to common attack patterns: SA-11, SA-15, SI-10, SI-15, SI-16 (85%)
- DEV.3.1 Blocking replay attacks: IA-02, SC-23 (70%)
- DEV.3.2 Error-handling routines: SC-24, SI-10, SI-11 (70%)
- DEV.3.3 Disabling output of sensitive data in error messages: IA-06, SI-11 (85%)
- DEV.3.4 Password hashing: IA-05, SC-13 (90%)
- DEV.4.1 Informing users about security-critical events: AC-09 (55%)
- DEV.4.2 Integrating external software from trusted sources: CM-10, SA-09, SR-04, SR-05, SR-06 (75%)
- DEV.4.3 Software components (software bill of materials): CM-08, SR-04 (75%)
- DEV.4.4 Integrity of external software: SI-07, SR-04, SR-10, SR-11 (80%)
- DEV.4.5 Security updates for external software: RA-05, SA-15, SI-02 (85%)
- DEV.4.6 Compiler options for security functions: SA-15, SI-16 (70%)
- DEV.4.7 Deterministic binary code (reproducible builds): SA-10, SA-15 (60%)
- DEV.4.8 Documenting default credentials: IA-05, SA-05 (80%)
- DEV.4.9 Default settings that follow security by default: SA-04, SA-08 (85%)
- DEV.4.10 Logging code changes: CM-03, SA-10 (85%)
- DEV.4.11 Testing source code changes: CM-03, CM-04, SA-11 (90%)
- DEV.5.1 Committing to a period for security updates: SA-22 (35%)
- DEV.5.2 Informing customers of the update period: SA-05 (30%)
- DEV.5.3 Integrity checks for installation and update files: SA-05, SA-10 (80%)
- DEV.6.1 Approval for use under change and test procedures: CM-03, SA-10 (85%)
- DEV.7.1 Secure deployment: CM-03, SA-10 (80%)
- DEV.7.2 Certificate monitoring for the application's domains: SC-17, SI-04 (50%)

## More
- A pattern's controls with their clauses in this framework: /api/v1/patterns/{id}/crosswalk?framework=bsi_grundschutz_pp
- Control-to-clause mappings as JSON: /api/v1/frameworks/bsi_grundschutz_pp?fields=mappings&per_page=100
- Rationale and gaps for each clause, as JSON: https://raw.githubusercontent.com/opensecurityarchitecture/osa-data/main/data/framework-coverage/bsi-grundschutz-plus-plus.json
- Page for people: /frameworks/bsi-grundschutz-plus-plus/
- Found an error? Open an issue at https://github.com/opensecurityarchitecture/osa-data/issues with the id, what OSA says and what the source says.
